SOLOR POWERED TRAFFIC SIGNAL  
     

 1.

SPECIFICATIONS

 
  1. HOUSING:
   Fabricated from plastic die molded
   Conforming to international standard as applicable for 200 / 300 mm dia signals  
   espectively, with Lens.
 
  2. OPTICAL SYSTEM:
   200-mm dia LED illuminated optical plate comprising numbers of 5-mm dia LED’s,  
   spaced at a pitch of 10 mm in an organized matrix. Amber / Red color

   300-mm dia LED illuminated optical plate
   Red ball type: ultra bright led @ pitch of 10mm
   400 CD o/p 10 watts. max

   Amber ball type: ultra bright LED @ pitch of 10 mm
   400 CD, o/p 10 watts max

   Green ball / Arrow type: super ultra bright led @ pitch of
   10 mm 300 CD TYPICAL, O/P 13 WATTS max
 

  3. POWER REQUIREMENT:
   24 / 48 VOLTS D.C. or 110 / 220 VOLTS A.C.
 
  4. CIRCUIT DESCRIPTION:
   LED’s are soldered in Glass Epoxy PCB The LED’s are operated in a multi channel   
   series/parallel matrix and are multiplexed pulse operated at high frequency, high 
   intensity and low duty cycle to obtain maximum visible brightness at minimum POWER
   consumption. The electronic circuit is built in the unit itself. With tinted lens for  
   protection in a sealed beam type plastic housing
   With built in photo-electric switch to reduce intensity / wattage during night time - 
   optional.
 

  5. DIMENSIONS:
   12” / 8” DIA.

 2.

SOLAR SYSTEM :

  SOLAR SYSTEM HAVING S P V WITH BATTERY & BATTERY CHARGER FOR 24 HOURS  
OPERATION UNIT WILL HAVE PHOTO ELECTRIC SWITCH FOR REDUCING INTENSITY OF LIGHT DURING NIGHT TIME .

WORKING VOLTAGE : 12 / 24 VOLTS D.C.

WATTAGE : Less than 200 WATTS (as per qty of signals required at site ) 200 watts  
calculated taking in consideration 48 signals in an intersection out of which not more 
than 20–22 signals are switched ON at a time and amber flashing signals at night 
time . 
We have designed special traffic Control unit for operating with solar power with basic
facilities consume less Than 10 Watts .

STORAGE BACKUP : 2 - 3 DAYS FOR 1 INTERSECTION .

 3.

 SPV SPECS:

 
  Solar Photovoltaic Module for Traffic Light Blinker system.  
  i. Load : 20 LED kits & Controller
ii. Duty Cycle : 70%
iii. Hrs. of Operation : 24 hrs/day during Night
iv. Location : as per site
v. Tilt angle : 25º c. from Horizontal (ground)
vi. Orientation of SPV : Perpendicular to N-S direction.
vii. Battery Charger – discharge efficiency : @ 90%
viii. Battery back-up : 3 days (72 hrs.) @ 25%
ix. Safety factor precaution towards :
              • Dust Accumulation Mismatching
              • Effect of temperature
              • Losses in the inter connecting cables
              • Degradation in output over its life span etc.
x. Nos. of SPV MODULES :
xi RATING :
xii. BATTERY REQUIREMENT :FOR 3 DAYS BACKUP TO BE DECIDED AFTER CALCULATING
                                        TOTAL NUMBER OF SIGNAL LED KITS TO BE USED AT A       
                                        JUNCTION.

 
    Download Specification