Traffic Light ( TL)
|
|
|
|
The Transaction Signal / Traffic Light (TL) is located in the toll lanes in a position where it is readily visible to users of the toll road, usually on the side of the lane beyond the toll booth. The traffic light consist of two traffic light heads mounted on a suitable pole.
a) RED
b) Green
A red signal is used to indicate that the user should stop,
whilst the green signal is used to indicate that the user should proceed.
|
|
|
|
|
| Specifications: |
|
|
|
| a) Size |
: |
200 mm F |
|
| b) Display (Stop) |
: |
Red LED full Round
|
| c) Display (Start) |
: |
Green LED Full Round |
d) Visibility Range
|
: |
20 m (under normal visibility conditions) |
e) Enclosure
|
: |
Polycarbonate plastic |
f) Wavelength
|
: |
Red 630 Nm |
| g) Wavelength |
: |
Green 526 Nm |
| h) LED |
: |
2000 mcd 5mm |
i) LED Pitch
|
: |
10 mm
|
j) PCB
|
: |
Glass Epoxy |
| k) Working voltage |
: |
90 – 270 Vac , 45 – 60 Hz |
| l) Power Factor |
: |
more than 0.90% |
| m) Protection |
: |
Surge suppression & protection & MOV / TRANZORB |
| n) Power rating |
: |
less Than 10 watts |
| o) Night dimming |
: |
Yes |
| p) Chain failure |
: |
No , single Led OFF during Failure of One led |
| q) MTBF |
: |
100,000 hrs |
| r) MTTR |
: |
30 minutes |
| s) Average Life Spam |
: |
8 years |
| |
|
|
Protection
IP 55 rated.
One led fail will not effect more than 2 % in Intensity
Conformal coating on PCB for moisture protection
Power supply with High Surge suppressions . |
| |
|
|
Enquiry Form |